tier_2 conversion
Convert SCSI (Sync) to IDE (PIO mode 1)
Convert SCSI (Sync) to IDE (PIO mode 1) with a verified formula, worked example, conversion table, precision guidance, and reverse conversion.
SCSI (Sync) to IDE (PIO mode 1)
SCSI (Sync) to IDE (PIO mode 1)
Quick answer
1 SCSI (Sync) = 0.961538461538 IDE (PIO mode 1).
Formula
IDE (PIO mode 1) = SCSI (Sync) × 0.9615384615384400000000000000
Precision
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
How to convert SCSI (Sync) to IDE (PIO mode 1)
- Enter a value in SCSI (Sync).
- Multiply the SCSI (Sync) value by 0.9615384615384400000000000000 to obtain IDE (PIO mode 1).
- Round the displayed IDE (PIO mode 1) value only when needed.
About these units
SCSI (Sync) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time. IDE (PIO mode 1) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time.
Explore related conversions
- Convert IDE (PIO mode 1) to SCSI (Sync)
- Convert SCSI (Sync) to bit/second
- Convert SCSI (Sync) to byte/second
- Convert SCSI (Sync) to E.P.T.A. 1 (payload)
- Convert SCSI (Sync) to E.P.T.A. 1 (signal)
- Convert SCSI (Sync) to E.P.T.A. 2 (payload)
- Convert bit/second to IDE (PIO mode 1)
- Convert byte/second to IDE (PIO mode 1)
- Convert E.P.T.A. 1 (payload) to IDE (PIO mode 1)
SCSI (Sync) to IDE (PIO mode 1) conversion table
| SCSI (Sync) | IDE (PIO mode 1) |
|---|---|
| 0 SCSI (Sync) | 0e-28 IDE (PIO mode 1) |
| 1 SCSI (Sync) | 0.961538461538 IDE (PIO mode 1) |
| 5 SCSI (Sync) | 4.80769230769 IDE (PIO mode 1) |
| 10 SCSI (Sync) | 9.61538461538 IDE (PIO mode 1) |
| 25 SCSI (Sync) | 24.0384615385 IDE (PIO mode 1) |
| 100 SCSI (Sync) | 96.1538461538 IDE (PIO mode 1) |
Frequently asked questions
How do I convert from SCSI (Sync) to IDE (PIO mode 1)?
Multiply the SCSI (Sync) value by 0.9615384615384400000000000000 to obtain IDE (PIO mode 1).
What formula does CalculatorHQ use for SCSI (Sync) to IDE (PIO mode 1)?
IDE (PIO mode 1) = SCSI (Sync) × 0.9615384615384400000000000000
How should I round the result?
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
Can I convert IDE (PIO mode 1) back to SCSI (Sync)?
Yes. Use the linked reverse conversion, whose formula is validated against this pair with round-trip tests.