tier_2 conversion
Convert SCSI (Ultra-2) to firewire (IEEE-1394)
Convert SCSI (Ultra-2) to firewire (IEEE-1394) with a verified formula, worked example, conversion table, precision guidance, and reverse conversion.
SCSI (Ultra-2) to firewire (IEEE-1394)
SCSI (Ultra-2) to firewire (IEEE-1394)
Quick answer
1 SCSI (Ultra-2) = 1.6 firewire (IEEE-1394).
Formula
firewire (IEEE-1394) = SCSI (Ultra-2) × 1.6
Precision
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
How to convert SCSI (Ultra-2) to firewire (IEEE-1394)
- Enter a value in SCSI (Ultra-2).
- Multiply the SCSI (Ultra-2) value by 1.6 to obtain firewire (IEEE-1394).
- Round the displayed firewire (IEEE-1394) value only when needed.
About these units
SCSI (Ultra-2) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time. firewire (IEEE-1394) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time.
Explore related conversions
- Convert firewire (IEEE-1394) to SCSI (Ultra-2)
- Convert SCSI (Ultra-2) to bit/second
- Convert SCSI (Ultra-2) to byte/second
- Convert SCSI (Ultra-2) to E.P.T.A. 1 (payload)
- Convert SCSI (Ultra-2) to E.P.T.A. 1 (signal)
- Convert SCSI (Ultra-2) to E.P.T.A. 2 (payload)
- Convert bit/second to firewire (IEEE-1394)
- Convert byte/second to firewire (IEEE-1394)
- Convert E.P.T.A. 1 (payload) to firewire (IEEE-1394)
SCSI (Ultra-2) to firewire (IEEE-1394) conversion table
| SCSI (Ultra-2) | firewire (IEEE-1394) |
|---|---|
| 0 SCSI (Ultra-2) | 0.0 firewire (IEEE-1394) |
| 1 SCSI (Ultra-2) | 1.6 firewire (IEEE-1394) |
| 5 SCSI (Ultra-2) | 8.0 firewire (IEEE-1394) |
| 10 SCSI (Ultra-2) | 16.0 firewire (IEEE-1394) |
| 25 SCSI (Ultra-2) | 40.0 firewire (IEEE-1394) |
| 100 SCSI (Ultra-2) | 160.0 firewire (IEEE-1394) |
Frequently asked questions
How do I convert from SCSI (Ultra-2) to firewire (IEEE-1394)?
Multiply the SCSI (Ultra-2) value by 1.6 to obtain firewire (IEEE-1394).
What formula does CalculatorHQ use for SCSI (Ultra-2) to firewire (IEEE-1394)?
Multiply the SCSI (Ultra-2) value by 1.6 to obtain firewire (IEEE-1394).
How should I round the result?
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
Can I convert firewire (IEEE-1394) back to SCSI (Ultra-2)?
Yes. Use the linked reverse conversion, whose formula is validated against this pair with round-trip tests.