tier_2 conversion
Convert SCSI (Ultra-3) to IDE (UDMA mode 1)
Convert SCSI (Ultra-3) to IDE (UDMA mode 1) with a verified formula, worked example, conversion table, precision guidance, and reverse conversion.
SCSI (Ultra-3) to IDE (UDMA mode 1)
SCSI (Ultra-3) to IDE (UDMA mode 1)
Quick answer
1 SCSI (Ultra-3) = 6.4 IDE (UDMA mode 1).
Formula
IDE (UDMA mode 1) = SCSI (Ultra-3) × 6.4
Precision
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
How to convert SCSI (Ultra-3) to IDE (UDMA mode 1)
- Enter a value in SCSI (Ultra-3).
- Multiply the SCSI (Ultra-3) value by 6.4 to obtain IDE (UDMA mode 1).
- Round the displayed IDE (UDMA mode 1) value only when needed.
About these units
SCSI (Ultra-3) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time. IDE (UDMA mode 1) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time.
Explore related conversions
- Convert IDE (UDMA mode 1) to SCSI (Ultra-3)
- Convert SCSI (Ultra-3) to bit/second
- Convert SCSI (Ultra-3) to byte/second
- Convert SCSI (Ultra-3) to E.P.T.A. 1 (payload)
- Convert SCSI (Ultra-3) to E.P.T.A. 1 (signal)
- Convert SCSI (Ultra-3) to E.P.T.A. 2 (payload)
- Convert bit/second to IDE (UDMA mode 1)
- Convert byte/second to IDE (UDMA mode 1)
- Convert E.P.T.A. 1 (payload) to IDE (UDMA mode 1)
SCSI (Ultra-3) to IDE (UDMA mode 1) conversion table
| SCSI (Ultra-3) | IDE (UDMA mode 1) |
|---|---|
| 0 SCSI (Ultra-3) | 0.0 IDE (UDMA mode 1) |
| 1 SCSI (Ultra-3) | 6.4 IDE (UDMA mode 1) |
| 5 SCSI (Ultra-3) | 32.0 IDE (UDMA mode 1) |
| 10 SCSI (Ultra-3) | 64.0 IDE (UDMA mode 1) |
| 25 SCSI (Ultra-3) | 160.0 IDE (UDMA mode 1) |
| 100 SCSI (Ultra-3) | 640.0 IDE (UDMA mode 1) |
Frequently asked questions
How do I convert from SCSI (Ultra-3) to IDE (UDMA mode 1)?
Multiply the SCSI (Ultra-3) value by 6.4 to obtain IDE (UDMA mode 1).
What formula does CalculatorHQ use for SCSI (Ultra-3) to IDE (UDMA mode 1)?
Multiply the SCSI (Ultra-3) value by 6.4 to obtain IDE (UDMA mode 1).
How should I round the result?
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
Can I convert IDE (UDMA mode 1) back to SCSI (Ultra-3)?
Yes. Use the linked reverse conversion, whose formula is validated against this pair with round-trip tests.