tier_2 conversion
Convert IDE (DMA mode 1) to USB
Convert IDE (DMA mode 1) to USB with a verified formula, worked example, conversion table, precision guidance, and reverse conversion.
IDE (DMA mode 1) to USB
IDE (DMA mode 1) to USB
Quick answer
1 IDE (DMA mode 1) = 8.86666666667 USB.
Formula
USB = IDE (DMA mode 1) × 8.866666666666634746666666667
Precision
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
How to convert IDE (DMA mode 1) to USB
- Enter a value in IDE (DMA mode 1).
- The conversion is linear, so each IDE (DMA mode 1) is worth 8.866666666666634746666666667 USB.
- Round the displayed USB value only when needed.
About these units
IDE (DMA mode 1) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time. USB is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time.
Explore related conversions
- Convert USB to IDE (DMA mode 1)
- Convert IDE (DMA mode 1) to bit/second
- Convert IDE (DMA mode 1) to byte/second
- Convert IDE (DMA mode 1) to E.P.T.A. 1 (payload)
- Convert IDE (DMA mode 1) to E.P.T.A. 1 (signal)
- Convert IDE (DMA mode 1) to E.P.T.A. 2 (payload)
- Convert bit/second to USB
- Convert byte/second to USB
- Convert E.P.T.A. 1 (payload) to USB
IDE (DMA mode 1) to USB conversion table
| IDE (DMA mode 1) | USB |
|---|---|
| 0 IDE (DMA mode 1) | 0e-27 USB |
| 1 IDE (DMA mode 1) | 8.86666666667 USB |
| 5 IDE (DMA mode 1) | 44.3333333333 USB |
| 10 IDE (DMA mode 1) | 88.6666666667 USB |
| 25 IDE (DMA mode 1) | 221.666666667 USB |
| 100 IDE (DMA mode 1) | 886.666666667 USB |
Frequently asked questions
How do I convert from IDE (DMA mode 1) to USB?
The conversion is linear, so each IDE (DMA mode 1) is worth 8.866666666666634746666666667 USB.
What formula does CalculatorHQ use for IDE (DMA mode 1) to USB?
USB = IDE (DMA mode 1) × 8.866666666666634746666666667
How should I round the result?
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
Can I convert USB back to IDE (DMA mode 1)?
Yes. Use the linked reverse conversion, whose formula is validated against this pair with round-trip tests.