tier_2 conversion
Convert USB to IDE (DMA mode 1)
Convert USB to IDE (DMA mode 1) with a verified formula, worked example, conversion table, precision guidance, and reverse conversion.
USB to IDE (DMA mode 1)
USB to IDE (DMA mode 1)
Quick answer
1 USB = 0.112781954887 IDE (DMA mode 1).
Formula
IDE (DMA mode 1) = USB × 0.1127819548872184511278195489
Precision
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
How to convert USB to IDE (DMA mode 1)
- Enter a value in USB.
- Scale the source number by 0.1127819548872184511278195489 to express the same quantity in IDE (DMA mode 1).
- Round the displayed IDE (DMA mode 1) value only when needed.
About these units
USB is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time. IDE (DMA mode 1) is a unit used in data transfer rate conversions. Data transfer rate measures digital information transmitted per unit of time.
Explore related conversions
- Convert IDE (DMA mode 1) to USB
- Convert USB to bit/second
- Convert USB to byte/second
- Convert USB to E.P.T.A. 1 (payload)
- Convert USB to E.P.T.A. 1 (signal)
- Convert USB to E.P.T.A. 2 (payload)
- Convert bit/second to IDE (DMA mode 1)
- Convert byte/second to IDE (DMA mode 1)
- Convert E.P.T.A. 1 (payload) to IDE (DMA mode 1)
USB to IDE (DMA mode 1) conversion table
| USB | IDE (DMA mode 1) |
|---|---|
| 0 USB | 0e-28 IDE (DMA mode 1) |
| 1 USB | 0.112781954887 IDE (DMA mode 1) |
| 5 USB | 0.563909774436 IDE (DMA mode 1) |
| 10 USB | 1.12781954887 IDE (DMA mode 1) |
| 25 USB | 2.81954887218 IDE (DMA mode 1) |
| 100 USB | 11.2781954887 IDE (DMA mode 1) |
Frequently asked questions
How do I convert from USB to IDE (DMA mode 1)?
Scale the source number by 0.1127819548872184511278195489 to express the same quantity in IDE (DMA mode 1).
What formula does CalculatorHQ use for USB to IDE (DMA mode 1)?
IDE (DMA mode 1) = USB × 0.1127819548872184511278195489
How should I round the result?
The stored factor is used at full decimal precision; round only the displayed result to the precision required by the task.
Can I convert IDE (DMA mode 1) back to USB?
Yes. Use the linked reverse conversion, whose formula is validated against this pair with round-trip tests.